Padel court planner
Design your padel club online: draw your building, its roof, columns and doors, and the planner computes the layout with the most courts that comply, in 3D, with a dimensioned plan. Free, no sign-up to design, in feet or meters.
What the planner checks
| Feature | What it does |
|---|---|
| Building or site | Width × length, indoors or outdoors, in feet or meters. |
| Roof and clear height | Flat, pitched (two slopes) or mono-pitch, with eave and ridge heights. It checks the clear height and shows where courts can go under a pitched roof. |
| Columns and entrances | Placed by drag-and-drop, with exact positions you can type in. |
| Access zone at each opening | A clear zone outside each court opening, 6.6 ft (2 m) deep and 26 ft (8 m) long in the minimum preset. |
| Clearances between courts | Side and end clearances (1.6 ft and 3.3 ft in the minimum preset, 6.6 ft all round in the competition preset). |
| Walkways | A clear walkway (3.9 ft in the minimum preset) from every entrance to every court. |
| Rule presets | Minimum rules or competition rules, and singles courts to fill the gaps if you want them. |
| Maximum layout | The engine computes the layout with the most courts that comply, in seconds. |
| 3D view | Your club in 3D, to orbit with the mouse or a finger. |
| Routes | The real routes from each court to each entrance and emergency exit, drawn on the plan. |
| Dimensioned plan | A PDF with the setting-out coordinates of every court, column and zone, measured from 0,0. |
The minimum preset uses the portal's own rules because the USPA publishes no spacing between courts on its website. The court itself follows the FIP rules: see padel court dimensions and ceiling height.
Design your padel club online, in six steps
With your own building, a few minutes. The solved example, a 44 × 62 m building with three columns, is solved and shown in 3D in about a minute.
Draw the building
Enter width and length, in feet or meters, and say whether it is indoors or outdoors.
Set the roof
Flat, pitched or mono-pitch, with eave and ridge heights, so the planner knows where the clear height is met.
Place columns and entrances
Drag them onto the plan or type their exact position.
Choose the rules
Minimum rules or competition rules, with or without singles courts.
Get the layout
The engine places the most courts that comply, in seconds. Check it in 3D and move a court by hand if you want.
Download the plan
Leave your contact details and download the dimensioned plan as a PDF. If you like, ask for up to 3 quotes on it.
See a solved example.
A 44 × 62 m (about 144 × 203 ft) building: open it and press “See the solved example” to watch the planner place the courts.
What you get, and what it costs you
- Designing is free, with no sign-up: draw, change and recalculate as often as you like.
- The dimensioned plan as a PDF: to download it, you leave your contact details.
- Quotes, only if you ask: tick the box and we pass your plan to up to 3 installers or manufacturers in your area so they can quote on the same plan. See padel court quotes.
Not sure where to start? Pick a typical building size, try a tennis court, or read how to open a padel club.
Frequently asked questions
Is the padel court planner free?
Yes. Designing is free and needs no sign-up. To download the dimensioned plan as a PDF you leave your contact details.
Can I design a padel court layout in feet?
Yes. The planner works in feet or meters; the US version opens in feet.
How long does it take?
The solved example (a 44 × 62 m building with three columns) is solved and shown in 3D in about a minute. With your own building, count on a few minutes to enter its dimensions, roof, columns and doors.
Does it check the ceiling height under a pitched roof?
Yes. You enter the eave and ridge heights and it places courts only where the clear height is met (19.7 ft in the minimum preset, 26.2 ft in the competition preset).
Can I get quotes on my layout?
If you want, you tick a box and we pass your plan to up to 3 installers or manufacturers in your area so they can quote on the same plan. Nothing is shared unless you tick it.
Your building, laid out in a few minutes.
Free, no sign-up to design. The dimensioned plan at the end.